Skip to main content
Version: 2.7.0

SimpleFOC

SimpleFOC is an opensource project providing an arduino library to control different types of motors, as well as arduino shields in order to drive them. We have integrated the SimpleFOC library with Luos engine for the creation of the drivers of BLDC and a Stepper motors, based in Arduino Zero boards. The SimpleFOC library contains different APIs for controlling different types of motors, getting the motor's information like the sensor values (position, angle etc.). In order to use it with Luos, you need to include the library into the motor driver services.

note

You can find more information about SimpleFOC here.

Hardware configuration​

Here you can see how you could connect the motors with the Arduino boards, as well as create a Luos network of Arduino Zero boards.

Luos network on arduino board​

In order to create a Luos network with Arduino Zeros and SimpleFOC motors you should configure the following PINs:

  • PTPA: PIN19
  • PTPB: PIN7
  • RX_EN: PIN2
  • TX_EN: PIN3
  • TX : PIN_SERIAL1_TX
  • RX : PIN_SERIAL1_RX

BLDC wiring​

luos_imgluos_img

Stepper wiring​

luos_imgluos_img

note

You can find a demo of how the motors work with Luos here.

note

You can find the code used for the SimpleFOC drivers here.